Photo: depositphotos.com
Typical Range: $3,600 to $7,200National Average: $5,400
When you need to rely on a stable foundation, you can almost always turn to concrete. It’s a reliable, sturdy material that’s used in just about every major construction project. Concrete slabs are one of the most commonly constructed flat surfaces and serve as foundations for homes, patios, sheds, upper floors, and more. A concrete slab could be precast before installation or built in place. And though they may seem like a fairly simple feature, many factors play into determining concrete slab costs that range from $3,600 to $7,200. Any or all of these qualifying aspects could affect your total price: the size of the pad, labor rates, grading, reinforcement, thickness, or any upgrades like radiant heating or finishing designs. As you plan your next project, use the information we’ve compiled to help plan for concrete slab costs.
What Is a Concrete Slab?
A concrete slab is a flat, horizontal surface made of a wet cement mix and crushed stones that hardens or cures into concrete. This curing process is a chemical reaction that ensures strength and durability against weather, weight, and use. A slab can be built directly into the ground by several inches as a foundation, or it can be suspended above the ground to form a flat floor for a multistory building.
Concrete vs. Cement Slab
If you’ve used the terms “concrete” and “cement” interchangeably in the past, you’re not alone. They’re commonly mistaken as the same material, but cement is actually the dry binder that makes up part of the concrete material. While cement could be used on its own to create a cement slab, it’s not advised. Cement slabs are prone to cracking and breaking since they don’t undergo the same curing process that concrete slabs do. The cost of a cement slab is $1 to $5 per square foot.
Concrete is made of a mixture of water, cement, and aggregate material like gravel or sand. Cement typically makes up 10 to 15 percent of this mix. As the mixture hardens, a chemical process cures the material to set it, making it reliably strong for foundations of all kinds. On average, concrete slabs cost $4 to $8 per square foot.
Photo: depositphotos.com
Factors in Calculating Concrete Slab Cost
You might have only considered labor, materials, and size as cost factors when you’re thinking of having a concrete slab installed. But other variables will affect the price, such as the kind of base needed, grading, the pad’s thickness, the preferred finish, and whether the pad will be cast on-site or off-site. The average cost of $5,400 for a concrete slab accounts for many of these standard options.
Labor and Equipment
The amount of labor needed differs from project to project. Labor involves preparing the foundation and forms, laying the base or reinforcement, mixing the concrete, pouring, and finishing. The average concrete slab cost of $4 to $8 per square foot includes labor. Heavy equipment could be required if significant grading needs to happen during the site preparation. Larger slabs will also require more equipment to handle the size of the job.
Grading
Some grading is included in most jobs, although it may be closer to leveling than grading. Suppose the area you’re planning to lay a slab on is not flat at all. In that case, the contractor will evaluate the site to see whether i can be appropriately leveled or if a structural engineer will be needed to determine the correct slope to hold the weight of whatever is planned for the concrete slab. Building a slab on a grade typically costs about the same rate of $4 to $8 per square foot.
Base
You may be able to build your concrete slab directly on the ground, but the slab could shift over time. Most concrete foundations are built on a base of gravel or crushed stone adaptable to the earth’s slight shifts below. This kind of base is best for unstable ground or ground that doesn’t drain well. Base costs will vary based on local material prices.
Concrete Type
To ensure the concrete slab lasts longer, a concrete specialist will determine what kind of mix is best for your project. It could impact the price slightly if your mix needs a higher amount of cement or aggregate than average. Also, if you need to add a concrete wall on the edge of the slab, you’ll pay more to have the shape formed and poured.
Slab Thickness
Concrete slabs come in any thickness that suits the project. The standard thicknesses are 4 inches and 6 inches, which work well for driveways, patios, sheds, and more. For a 24-foot by 24-foot, 6-inch-thick garage floor slab, you’ll probably pay $3,460 for labor and materials. An epoxy seal would cost an extra $1,430 to $2,960.
Thickness of Edges
As you consult with a concrete contractor, you might learn that the design and function you have planned for your concrete slab will require thicker edges than the rest of the area. This could be due to the size of the pad or the weight of a structure that it will need to hold. Thicker edges will cost an extra $1 to $1.50 per square foot.
Local Material Costs
The cost of concrete could differ from one city to the next. If there is high demand in your area for concrete installations, prices rise to meet the demand. Consult with a contractor or do your own research to learn what material prices look like in your area.
Finish
There are several techniques that concrete specialists use to make a plain concrete slab look like faux wood or paver stones. Additionally, you could opt to add a splash of color to create a distinctive look. These finishes come with associated costs, so it’s not worth adding a special finish if the slab is planned to simply hold up a shed. For $8 to $12 per square foot, you can have the slab textured, colored, bordered, or stenciled. If you prefer engraving, staining, or scoring, you’ll pay $12 to $18 per square foot. Any advanced or highly customized designs cost $18 or more per square foot.
Geographic Area
Construction costs differ widely from one region to the next, but especially between urban and rural areas. Higher living costs affect labor and material rates for metropolitan areas. Still, rural locations could have fees for travel or higher costs due to demand if there aren’t many contractors available.
Precast vs. Cast in Place
Precasting a concrete slab is a helpful option in many situations where the slab is a unique size or design, and it can be placed easily with the proper equipment. For instance, parking garages, roof tiles, concrete pavers, and fire pits are just some examples of a precast slab. Casting in place is more common in standard projects like driveways or patios where the forms are set to the project’s exact specifications, then the concrete is poured in place. Concrete prices are typically lower when casting in place.
Photo: depositphotos.com
Additional Costs and Considerations
There are a few more possible considerations that can affect the overall price. Opting for radiant heating is an upgrade that appeals to many homeowners, and some slabs will need extra reinforcement or additives to remain durable.
Reinforcements
Every slab will require some kind of mesh to help create a stable base for the concrete to adhere to as it cures, but if extra stability is needed, then a wire mesh can be added for another $0.35 per square foot. Concrete slabs that will hold a heavy load or be built on soil in poor condition could require steel rebar reinforcements. The rebar is built in a grid structure and costs $2 to $3 per square foot on average.
Radiant Heat
Just as hardwood or tile floors can have radiant heating, concrete can, too. It’s a great way to keep feet warm on a cold surface while saving energy costs and avoiding the dust from forced air systems. As the concrete is being prepared, the installer will lay a pattern of tubes with hot water or electrical heating elements to heat the surrounding concrete. Concrete slabs have become a popular option for use as flooring in industrial-style homes or in businesses. But you could also opt to have radiant heat installed in a patio or driveway so that snow and ice don’t build up so easily in the winter.
Additives
If you need an extra-strength concrete slab without rebar, ask about having proper additives added to the concrete mix. These special elements can reduce moisture content, maintain quality, and ensure a strong cure.
Removal
Are you replacing an old concrete slab? Then you’ll need to factor in the cost to break up and haul away the original slab before you build the new one. Concrete slab removal costs $500 to $1,800 on average.
Photo: depositphotos.com
Concrete Slab Cost: Types of Concrete
While most home projects don’t require any particular kind of concrete mixture, it’s best to be prepared with possible options that may apply if you’re working on a distinct project. We’ve included several types of concrete that could be used for concrete slabs.
Modern Concrete
This is the standard kind of concrete used for most projects, including driveways, patios, and sidewalks. It’s a basic mix of cement, aggregate, and water that cures over a period of several days to form a strong foundation.
High-Strength Concrete
When a concrete slab is used to hold more weight than average, like a multistory house or heavy balcony, the concrete is mixed at a higher strength to withstand the added pressure. High-strength concrete can hold over 6,000 psi.
High-Performance Concrete
High-performance concrete is the next step up from high-strength concrete. It performs well against frequent foul weather and can withstand 8,000 psi.
Ultra High-Performance Concrete
Ultra high-performance concrete is specially formulated with fibers and extra additives like limestone or quartz flour to make an extremely strong structure. It’s capable of withstanding over 17,000 psi without the use of rebar.
Stamped Concrete
You can choose to finish any of these types of concrete with a stamped finish. It’s a great way to spruce up a flat surface to look like wood, stone, or brick. The contractor has a limited window of time in which the freshly poured concrete can be stamped by hand. Since it’s a labor-intensive process, the cost averages $12 to $18 per square foot.
Self-Consolidating Concrete
Once water is added to a concrete mixture, it must remain in constant motion; otherwise, it will harden in the container it was mixed in—a disaster inside a concrete mixer. If your project has a hard-to-reach area or structural support made of concrete, the installer will probably use self-consolidating concrete, which flows more quickly and doesn’t have to be agitated constantly. It’s best for tricky areas or special structures.
Glass Concrete
If you love pebbled beaches or sea glass, then a glass concrete slab, steps, or border is an option to consider. You can have the concrete mixed with recycled glass to create a visual masterpiece. The glass pebbles create a textured surface that’s sealed with epoxy to hold the pebbles in place against weather and foot traffic.
Asphalt Concrete
A special mix of asphalt and concrete is an option for commercial use like roads, airports, parking lots, or even dams. It combines some of the asphalt slurry mixes with any number of crushed stones like gravel, sand, or mineral powder. Asphalt can be used for driveways just as concrete can, but it comes with its own pros and cons.
Permeable Concrete
If you’re interested in a more environmentally friendly option, then permeable, pervious, or porous concrete should be on your list. It’s mixed without fine aggregates, so a honeycomb structure forms as it hardens. Rainfall, air, and heat can move between the layers, unlike modern concrete. It’s not as smooth as traditional concrete, but it can be just as durable.
Monolithic Concrete Slab
As the prefix “mono” suggests, a monolithic concrete slab is a single structure that’s poured all at once. This is often done when pouring a house foundation where the footing is usually lower than the floor area. The cost of a monolithic concrete slab completely depends on the total size and design, but an average range is $4,600 to $20,000.
Post-Tensioned Concrete Slab
Also known as an engineered slab, a post-tensioned slab is basically a monolithic slab but with steel cables laid inside the concrete. The ends of the cables are stretched and attached to their designated hooks to help add strength to resist cracking.
Slabs With Foundation Walls
If the concrete slab needs to include a foundation wall, then the concrete will be poured directly into a pre-built wall instead of the forms. Piers or post holes are often added for additional support.
Photo: depositphotos.com
Why Install a Concrete Slab?
Almost every construction project, building, or support system uses concrete—more even than wood. It’s a robust and durable material that can be customized to fit a project’s exact needs. Beyond being necessary support structures, they’re also a great way to create stable flat surfaces indoors and outdoors.
Foundations
Foundations must be strong, durable, and resist breaking down from stress or weather. That’s why concrete is such a popular choice as a foundation material. When it’s set below the frost line, it stays in good condition to hold the structure above. Concrete also allows room for any kind of reinforcement without losing structural integrity.
Ceilings and Floors
Whether a thick or thin slab is needed, concrete makes a great floor surface that can also be reinforced and supported with steel cables or other elements. These are often precast and can be used at multiple levels beyond the ground floor.
Pool Deck
Wooden pool decks require heavy maintenance or replacement since the chemicals in the water break down the surface more quickly. On the other hand, concrete pool decks remain the popular choice since they’re durable and can be customized to suit many styles.
Patio
If you need a flat space for outdoor living, concrete ranks high on the list of material choices. You could even choose a prefabricated slab if your location doesn’t have any unique circumstances. These are usually thinner, so install a concrete patio on-site if you need more weight capacity. You can ask a contractor about the concrete cost per yard for small patios.
Utility Slab
Outdoor utilities need a flat surface to be able to operate properly. Air conditioning units are the most common reason for pouring a concrete slab. The slab needs to be thick enough to support the weight and about 4 inches wider on all sides than the unit itself. Don’t plan this slab until your HVAC technician has given you the exact specs of the unit that’s best for your house.
Recreational Space
If you already have a patio but want to add a hot tub, you’ll need to pour another concrete slab. Be sure to ask how heavy the hot tub will be when it’s full so that the slab is built to support it without shifting or sinking unevenly. Also, you may want to create a space for a basketball hoop, and a concrete slab is a cost-effective way to create the flat surface you need for a quick pickup game.
Concrete Slab Cost: DIY vs. Hiring a Professional
Working with concrete involves more tools and equipment than you think, and if you get into a jam, you could end up with some ruined concrete-covered clothing—or worse. If you are familiar with the kind of concrete you need and how to operate a small mixer, you could try to pour your own small slab for an air conditioning unit; just know that the slab must be level so the condenser can work properly. Beyond minor jobs that don’t need special concrete or reinforcement, you’re better off handing the job over to a pro with plenty of experience.
Preparing large areas for concrete takes time, effort, and coordination to make sure it’s leveled and shaped correctly. Making certain the concrete forms are straight isn’t as easy as it looks, and if the concrete ends up sloping toward your house on accident, you’ll end up with foundation problems from pooled water. In some cases, the project will require a structural engineer’s assistance to ensure the slab can withstand the weight, slope, or design. Saving a few thousand dollars on labor isn’t worth it if a poor job results in significant damage later. A concrete contractor should also provide a warranty or guarantee on their work.
Photo: depositphotos.com
How to Save Money on Concrete Slab Installation
Many want to save money on big projects since every extra feature can ratchet the price higher. Some of the concrete slab costs for your project will largely depend on the terrain and structural needs, which are usually out of your control. But there are still some ways to save on concrete slab costs.
DIY site preparation. Save on labor costs by preparing your site for concrete work on your own. This includes breaking up an old concrete slab. Choose the size you actually need. Don’t go overboard making an expansive patio that requires extra materials and grading. Reinforce only if you need to. Ask about using high-performance concrete and what the cost is compared to a reinforced concrete slab. Check the thickness. Make sure the slab is only built as thick as it really needs to be. Get a second opinion if you’re unsure. Keep it simple. If staining or stamping concrete just doesn’t fit your budget, then opt for a simpler surface. Get quotes from multiple contractors. Choose the best contractor for you, based on their experience and price. Avoid designing curves. Design a slab that uses straight edges since forming curves takes longer and costs more. Buy subgrade concrete. You can reclaim old concrete and use it for some concrete projects that don’t have to have the best concrete available. Coordinate with neighbors. If you’re in a developing neighborhood, you might be able to get a bulk discount by coordinating all your jobs around the same time to purchase the concrete at bulk prices. Seal it often. If you seal your slab regularly, it will last longer, so your investment stretches further.
Questions to Ask About Concrete Slab Cost
The concrete slab you’re planning to build will probably be used frequently. Since concrete lasts for decades, such a frequently used feature should be built to last by a reputable contractor. Use these questions to help guide your search for a concrete contractor who is licensed and insured.
How long have you been in business? Do you have photos of previous projects you’ve completed? Can I review a line-item quote? Have you ever worked on a customized project like mine? What kind of site preparation will this job require? How much concrete do I need? Should I use a precast slab or build it on-site? What kind of concrete is best for my region and project? Will we need to reinforce it or use a stronger mix? How thick will the slab need to be? If I plan to build a balcony later, how will this slab need to be built now? What do you charge to remove an existing concrete slab? Can you stain or stamp my slab? If so, how much will that cost? How much will sealing the concrete cost? How soon can I use the new slab? What kind of maintenance does it need? Do you guarantee or warrant your work?
FAQs
Every variation on a concrete slab installation changes the price, whether it’s size, thickness, shape, design, finish, or reinforcement. The more standard or common the project, the easier it will be to estimate concrete slab costs. Use these answers to frequently asked questions to help guide your budgeting process.
Q. How much does it cost to pour a 12-foot by 12-foot concrete slab?
Assuming that the slab does not require extra grading, reinforcing, or thickness, you can expect to pay $865 for a 12-foot by 12-foot concrete slab.
Q. How much does a 1,200-square-foot concrete slab cost?
A 1,200-square-foot slab measures 30 feet by 40 feet, which is a large design. The average cost is $7,800 to install a slab this size.
Q. What’s the difference between a concrete slab and a cement slab?
A concrete slab is made of a stronger material that’s specifically designed to withstand heavy weight or tension. It’s made of cement, water, and some mixture of crushed rocks or sand. A cement slab is made of cement and water, making it less durable and more prone to cracking.
Q. How much is concrete per yard?
On average, concrete costs about $110 per cubic yard.